Steps
Step-by-step
1 Sanitize all of your equipment (see notes). 2 If desired, create a starter culture by mixing the fruit juice and yeast. Place into a 1-quart container fitted with a rubber stopper and airlock. Keep at room temperature, out of direct sunlight, for 1–2 days until the mixture is bubbling. This starter culture will cause the fermentation below to b 3 Heat the water in a pot over medium heat, and slowly stir in the honey until completely dissolved. There is a common disagreement among mead makers as to whether you should boil the mixture or not; Boiling will alter the flavor but will enhance the clarity of the finished mead. 4 Remove the pot from the heat, and cool to 170°F (76°C). 5 Stir in the raisins, and transfer to your fermentation vessel. Cool to room temperature (about 68°F/20°C). 6 Rehydrate the yeast if you did not make a starter culture. Transfer the yeast mixture to the honey mixture in the vessel, and attach the airlock. 7 Place the vessel in a cool (68°F/20°C), dark place. After about a day, the airlock should start to allow bubbles to escape, which indicates beginning fermentation. The raisins will rise to the surface of the mixture. Avoid stirring or agitating the mixture, as it may cause the liquid to rise up and 8 Let the mead ferment for 4–6 weeks. 9 If desired, "rack" the mead to allow the mead to clear faster: carefully siphon it into a second carboy with a sanitized tube, avoiding the sediment to prevent cloudiness and avoiding splashing to prevent incorporating excess oxygen. Attach an airlock to the second carboy. 10 Ferment for another 3 months or until all signs of fermentation have stopped (usually when the airlock doesn't produce any bubbles for a long period of time—typically over 30 seconds between bubbles) and your mead has cleared enough to read a newspaper through it. 11 Rack the mead once more. 12 Bottle the mead by sealing in sterilized bottles using airtight caps or quality corks. If the fermentation is not complete, pressure will build up inside the sealed bottles and cause them to explode. 13 Age the mead in the bottle for at least 6 months (or longer) before drinking. Notes * Mead should be made in sanitized equipment to ensure food safety. Potassium metabisulphite is a common sanitizing agent. Those who are allergic to sulphites can use other sanitizing methods. Failure to remove all traces of this chemical from the equipment may result in poisonous or otherwise undrinkable mead. * It is imperative that sterile conditions be maintained while the carboys are open to
Photo: Wikibooks Cookbook contributors · Wikimedia Commons · CC BY-SA
Source: Wikibooks Cookbook
